Новое на форуме

Canon PowerShot S... ->
[06.09.21 19:09] aleksey
PowerShot A3200 I... ->
[08.12.18 22:50] grandgreed
Проблемы с устано... ->
[24.12.17 19:28] AlexKooper
Powershot G12 ->
[13.09.17 14:33] slod
PowerShot SX160 ->
[23.01.17 03:20] WillieWhomy
Русский Хелп по а... ->
[22.01.17 21:12] Frankabunk
Чем отличается те... ->
[22.01.17 21:11] Frankabunk
Canon PowerShot S... ->
[22.01.17 21:10] Frankabunk
Главная » 2008 » Апрель » 01
Просмотров: 2793 | Дата: 01.04.08 | Комментарии (6)

В новой сборке, при работе с видео возможны проблемы с зумом. Очень часто объектив выехав, не фокусируется, а при обратном зумировании не убирается. Иногда есть зависания фотоаппарата и даже вынимание батареек не помогает. Приходится по несколько раз вставлять их и Аккуратно помагать обьективу руками "заехать" обратно. Проблемма устраняется, но точно не известно когда ждать рабочей сборки!

Подробнее на английском

vit40
Jr. Member

Posts: 65

Re: Build 48
« Reply #32 on: 30 / March / 2008, 09:06:26 » Quote

Allbest, I have another bug report, concerning video mode - on S3IS this time

Option OSD parameters -> Miscellaneous values -> Show in video mode doesn't work as it should in video mode of S3IS (which is started with a dedicated movie button, unlike other cameras where shutter is used). Values (like aperture, ISO) are shown only if I half press the shutter during video recording (to do refocus for example). Image distance is shown in miscellaneous (during video recording) only if MF selected or if I half press the shutter

-----

Also, as I mentioned before, if I switch on A620 in video mode, ISO label is showing 0. But if I change to some of photo modes, it starts working and it's working after that in video mode alsoDisplayed labels - A620 video mode set on command dial:

- no keypress : zoom, aperture, distance, iso
- half press : zoom, aperture, distance, iso
- recording : zoom, aperture, distance, iso

note1: Aperature and iso are updated regularly, image distance is updated
on half press (that's how camera works). Zoom value is also updated regularly
during video recording, and image distance label shows how camera is refocusing
after zoom change during video recording (or within my video script with MF ability).

note2: iso label shows 0 if camera was switched on with command dial in video mode.
Turning the dial to one of photo modes and back to video solves this issue

Displayed labels - S3 video mode set on command dial:

- no keypress : zoom, aperture, distance, iso

note: aperture and iso updated regularly, but image distance isn't updated although
AF is working all the time in video mode (unless MF is on, of course)

- recording, started with dedidated movie button (with command dial in video or photo mode) : zoom only

note1: aperture, distance and iso are displayed on half press of the shutter during recording
note2: image distance is also displayed during recording in MF mode
note3: with "Show misc values"="Allways", aperture, distance and iso are displayed, but
distance and iso are not updated according to conditions
note4: same issue with iso displaying 0 as on A620


Поиск

v